Mousepad

I made a mousepad from an old poster board and shirt. this is a lot cheaper than buying a big mousepad which is why I made it.

Supplies

For this mousepad, I used an old shirt made of polyester but any material that a mouse can glide well on works. I used an old poster board to stretch the material over but you can use a piece of cardboard

Step 1: Cut Shirt

My first step was to cut the shirt up

Step 2: Glue

my next step was to stretch the shirt over the poster board and glue it down

Step 3: Final Step

I then pulled the extra material back and stapled it down