My Maisto 1/18 Car With CHP Lights

Introduction: My Maisto 1/18 Car With CHP Lights

Step 1: Get the Supplies

Make sure you have the following:
- sotering tools
- + and - wires (red and black)
- LEDs
- 9v battery

Step 2: Wire the Lights

Make sure you are wiring the lights correctly. Red is - and black is +.

Step 3: Make Sure That They Flash

You need sotering for these to flash. DO A LIGHT TEST BEFORE INSTALLING. this may take weeks to complete.

Step 4: Install the Lights

Using glue (NOT SCHOOL GLUE) install the lights on to the car. BE EXTRA CAREFUL NOT TO GLUE THE WIRES. drying time varies depending on what glue you use.

Be the First to Share

    Recommendations

    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest
    • Hand Tools Only Challenge

      Hand Tools Only Challenge

    Discussions