Neoprene Dice Tray

Intro: Neoprene Dice Tray

Long time no posting but here's a quickie.

STEP 1: Materials and Tools

Cheap, neoprene mouse mats. I payed about €2 each.
Snap buttons with tools. I payed about €8 for a set of ten buttons with tools.
You also need a hammer and something to make a hole with.

STEP 2: Add Snap Buttons

Follow the instructions for your set. Add the snaps in pairs to each corner of the mat. I put mine about 20mm from the corner and 15mm in from the edge.

STEP 3: Snap Together and Roll Some Dice.

That's it. About an hours work for four.

Comments

[Penolopy Bulnick]

These look perfect! Great reuse for mousepads :)

[omnibot]

Thanks! It was a very rewarding 1 hour project.