Nerf Gun Hack Airsoft

by a_person

14K1120

Intro: Nerf Gun Hack Airsoft

This nerf gun hack makes a switch shot EX3 into an AWESOME airsoft gun. This is an extremely easy hack which requires absolutely NO MODDING (to the gun) WHATSOEVER!!! And as far as I'm concerned this is the first EX3 mod.
Both barrel parts aren't mine and credits go to whoever made them. 
Oh and I have no idea what the fps is sorry.
Constructive criticism welcome.

First instructable please be nice.

STEP 1: Materials

You only need 3 things for this mod:

a dismantled BIC pen tube
a nerf dart minus the velcro, plunger, whistle, etc.
a nerf switch shot EX3 (will probably work with any front-loaded gun)
and a pair of needle nose pliers

STEP 2: Barrel

The barrel is the hardest part of this mod but it is fairly easy.

Just pit the pen into the nerf dart, and leave a little bit of the pen sticking out the side you put into the gun.
Crimp the top a little with the pliers so the bullet doesn't fall out

STEP 3: Insert Barrel and Your DONE!!!

Just put the barrel piece into the nerf gun's barrel and your ready to shoot

DISCLAIMER
I AM NOT RESPONSIBLE FOR ANYTHING STUPID YOU DO WITH THIS. ANY INJURIES CAUSED WHILE USING THIS GUN ARE NOT MY PROBLEM. My word of advice..... DONT SHOOT YOUR EYES OUT!!!!! WEAR EYE PROTECTION!!

20 Comments

Paintballer98 13 years ago

You really dont need the nerf dart all you have to do is pit the pen down the barrel and tape around the edges and you can shoot about twice as far as this

lowe 13 years ago

READ THIS: If you do the air rrestricter mod, this airsoft gun goes 2 times futher, no joke.I made a magazine for this and i made a perfect hop up

awaite 13 years ago

Is there a way to make this magazine feed?

DJNASHA 12 years ago

bic pen tube a.k.a body

a_person 13 years ago

I tried adding a mag feed but it went down in flames..... it acted more like a Shotgun. give it a try though

lowe 13 years ago

When you tried to make the mag, did the bbs shoot out of the mag?

a_person 13 years ago

The bullets shot out of the barrel

Fractal Art 13 years ago

Very simple. I'm going to try this later - thanks for the Instructable!

a_person 13 years ago

No problem! I actually replaced the barrel with PVC and removed the air restrictor a couple weeks ago. When I re-tried this mod on it it was SCARY. It was like a full powered airsoft gun. I'm thinking about posting it. :)

cookie38 13 years ago

my parents wont let me have an airsoft and my friends tease me about it
PLZ

a_person 13 years ago

to cookie and milamber this works with ANY barrel loaded nerf gun and I would not recommend using this for a airsoft gun fight because it takes forever to load and shoot and the PVC barrel thing ccant really be posted but I'll try

northernmagnet 13 years ago

what nah i have no stupidity i just sorta did a poor mans hack to my dart tag gun (FYI it somehow started shooting normal neft darts 25 ft.) by adding a light and scope that improves aim now this somebody who does a nerf fight with me at night should watch out. :)

DBMods 13 years ago

what did you do to your night finder

a_person 13 years ago

its not a nitefinder its a switch shot there 2 different guns

a_person 13 years ago

ya glad i could help