OBSTACLE AVOIDANCE With the KY-032

by vandenbrande

7.6K60

Intro: OBSTACLE AVOIDANCE With the KY-032

Hello World! I made another example project, I am using the KY-032 to show you how obstacle avoidance Sensors work. The code is basic but works fine for simple things. From the code you can build bigger projects.

The obstacle avoidance sensor is being used in multiple things, for example Unmanned military vehicles.

In cars, and a lot of robotics.

Check the next step for code and schematic.

STEP 1: Schematic Code & Parts List.

Just wire everything up like the schematic and it should work.

Parts List.

  1. Arduino Uno, I used the RobotDyn UNO, a chinese copy with 7 Analog pins.
  2. 3 Color RGB KY-016
  3. Obstacle Avoidance Sensor KY-032
  4. Buzzer
  5. Set of Jumper wires MM/FF/MF
  6. 9 Volt battery + Battery Plug.(optional)