[OMGFLY] How to Build GEPRC-IX5 Racing Drone

by myomgfly

59101

Intro: [OMGFLY] How to Build GEPRC-IX5 Racing Drone

ix5 from omgfly

STEP 1: GEP-IX5 Installed Components List =====

GEPRC-IX5 Wizard Fairy through the rack (the latest)

GEMFAN RT2205 2300KV motor

GEMFAN MAVERICK 24A ESC

GEMFAN MASTER Master Paddle 5045 * 3 (latest)

FOXEER 1190 NEW ARROW FPV camera

FOXEER TM25 Figure 25/200 / 600mw adjustable

FOXEER 5.8G right-handed antenna

F3 EVO fly control brush BETAFLIGHT

DEVO RX716 PPM Receiver

4S 1300-1500 battery

STEP 2: = Key Out of the Box Introduction =====

IX5 Wizard, is X models, 5 inch pitch 200 wheelbase,

TPU material with 3D print hood, reduce wind resistance! Under the battery, the top 35 degrees tilt camcorder installation and so on ...

STEP 3: FRAME

THE LAST IMPORTANT

Side panels 2mm, equipment and roof 1.5mm

Comments