Obstacle Avoider Robot

This is a simple circuit of OBSTACLE AVOIDER ROBOT using TINKERCAD Website.

Supplies

Tools needed are :-

1) Arduino - 1pcs

2) Breadboard - 1pcs

3) Motor Driver (L293D) - 1pcs

4) Ultrasonic Sensor - 1pcs

5) Motors - 2pcs

Step 1:

Do the circuit as shiown in the picture above using the TINKERCAD Website.

Step 2:

Do the coding (programming) for the circuit as shown in the picture above using the TINKERCAD Website.