Obstacle Avoiding Robot - TinkerCAD Simulation

This is a TinkerCAD Simulation Video of Obstacle Avoiding Robot

Step 1: Components Required

You will require the Following Components

01. Breadboard - 1 No.
02. L293D - 1 No.
03. DC Motor - 2 Nos.
04. Ultrasonic Sensor - 1 No.
05. Arduino UNO - 1 No.

Step 2: Connections

Connect the Components as shown in the above Image.

Step 3: Blocks

Assemble the blocks as shown in the above image for the Obstacle Avoiding Robot