Origami Velociraptor

An easy Tutorial to make an Origami Velociraptor.

Supplies

1x square piece of paper (16cm/16cm)

1x Paperclip

Step 1:

Fold the sheet of paper diagonally from both sides.

Then turn the sheet over.

Step 2:

Fold the paper on both sides in half.

Step 3:

Step 4:

Fold both corners to the center.

Do the same on the other side.

Fold the upper corner downwards.

Step 5:

Unfold the paper as shown.

Step 6:

Turn the sheet over and fold it in the same way as on the other side.

Step 7:

Place the paper in front of you as shown in the video and make sure that you don't fold the sheet completely.

Step 8:

Fold the tip upwards as shown in the video and then fold the whole sheet in the middle.

Step 9:

Fold the tip to the side and then fold the tip forwards.

Then fold the tip backwards and the arms downwards.

Step 10:

Fold both legs down.

Fold both tips backwards and then forwards.

Step 11:

The stomach is folded inwards on both sides.

Step 12:

Use a paper clip to stabilize the legs so that the velociraptor remains standing.