PVC Cannon
Intro: PVC Cannon
a cannon that shoots acorns,batteries,water,cO2 cartriges and all under pressure
STEP 1: Parts
}}}2in pipe
2in cap
2in to 1/2in reducer
2in coupling for reducer
1/2in pipe [for connecters and barrel]
1/2in valve[slip]
tire valve[from autozone]
3/4 pipe for barrel
3/4 to 1/2 reducer [for barrel]
1/2 cap [for handle]
STEP 2: Put Everything Together!
just snap everything together and glue!
53 Comments
Masher007 10 years ago
Danger: See link: This is not spam, but a warning. PVC will fail suddenly after a while. This was band member that hurt badly by a T-Shirt launcher explosion.
See the pictures and never use PVC to hold air, Please.
https://fundrazr.com/campaigns/1Zs3c
..
zack attack 14 years ago
CaseBoy 13 years ago
H20 13 years ago
Makersauce 13 years ago
DIY and STUFF 14 years ago
spudling9 15 years ago
KiNG07 16 years ago
PyroManiac96 15 years ago
Combustion and Pneumatic Style Guns
And to charge it you need an air compressor or bicycle pump, and you pump it up
zach12 15 years ago
zach911 15 years ago
theRIAA 15 years ago
theRIAA 15 years ago
zach911 15 years ago
theRIAA 15 years ago
mag400 16 years ago
Bright Shadow 16 years ago
receiver545 16 years ago
zach911 15 years ago
receiver545 15 years ago