Paracord Braclet

10,235

150

10

Introduction: Paracord Braclet

About: Fisherman, Kayaker, knife collector, outdoorsman. Living on a small farm in the Midwest

Step 1: Melt Your 2 Lengths of Paracord Together

Step 2: Loop the Paracord Around the Clasp

Step 3: On the Next Clasp Take One Under and Up and the Other Over and Down the Clasp

Step 4: Take the Right String Over the 2 Cores and Take the Left Oneover the Right Under All and Throught the Right Strings Loop and Pull Tight

Step 5: The Side With the Loop Will Always Go Over the Core

Step 6: Repete Step 4 Till You Are All the Way Down to the Other Clasp

Step 7: Next Cut the Exess Cord Off and Melt It to the Braclet

Step 8: And You Are Done

Be the First to Share

    Recommendations

    • Make it Real Student Design Challenge #3

      Make it Real Student Design Challenge #3
    • Barbecue Speed Challenge

      Barbecue Speed Challenge
    • Furniture Contest

      Furniture Contest

    10 Comments

    0
    katofall00
    katofall00

    7 years ago

    Male and Female clip, length of cord flame,knife

    0
    katofall00
    katofall00

    7 years ago

    When i did the weave i took a cord the length of the bracelet and i took it under then over the middle weaves It is kinda hard to explain

    0
    massmurder
    massmurder

    7 years ago

    Can u list all material needed please

    0
    morlando27
    morlando27

    7 years ago on Introduction

    Could you explain how you made the green & black (3rd one down) and the 3-colored (bottom) bracelets? Thanks!

    0
    sarbear123
    sarbear123

    7 years ago

    It looks so cool!

    0
    katofall00
    katofall00

    7 years ago

    I got them on amazon.. Thanks for comment!

    0
    Soggybottom
    Soggybottom

    7 years ago

    Where did you buy the clips? Great Instructable! Thanks!