Introduction: PartMaker SwissCAM Fundamentals
This series of tutorials is intended to assist a new user getting comfortable with the workflow and programming some simple parts in PartMaker SwissCAM.
Step 1: Pin
Instructional video and files to program a pin on a Swiss lathe with PartMaker. This tutorial helps you understand the workflow of the software.
Attachments
Step 2: Screw
Instructional video and files to program a Swiss part with segmented turning, threading, and cross milling on a Swiss lathe with PartMaker. This tutorial includes videos to program from print and solid model.
Attachments
Step 3: Plug
Instructional video and files to program a plug part including turning, cross milling, cross drilling, and back drilling on a Swiss lathe with PartMaker. This tutorial includes videos to program from print and solid model.
Attachments
Step 4: Reamer
Instructional video and files to program a reamer part including turning, cross milling, and drilling on a Swiss lathe with PartMaker. This tutorial includes videos to program from print and solid model.