Pipe & Pallet Shelf

Steph has been looking for some shelves in her office to hold supplies. We haven't used pipe or pallet wood before in a project so we thought shelves would be a great way to try both materials and get some cool shelves!

Step 1: Watch the Video

Step 2: Gather Materials

• Pallet (they come in different shapes and sizes- we used a pallet that had wood 5.5" wide)
• Sawzall (to cut pallet)
• (2) 3/4" Plumbing Pipe 6" length
• (2) 3/4" Flange
• (2) 3/4" Cap (we priced out each item separately and found it cheaper to buy them in a set on amazon. Same pipes you would buy from the hardware store but it came all together in one package)
• (16) Screws and anchors

Step 3: Deconstruct the Pallet

We cut the sides off with a sawzall then cut through the middle support, and cut the boards off.

Step 4: Sand and Seal the Board

Step 5: Decide Where You Want the Shelves

Step 6: Attach Pipes

Step 7: Use a Straight Edge and Level to Get Pipes Lined Up

Step 8: Add Pallet Wood and Done

For more detail check out our website!

Comments

[mnerey73]

Awesome project, you saved me some money because an industrial look shelve for my teenage son's room was costly. Keep on posting this awesome ideas!

[DIY for Homeowners]

Thanks! Glad it was helpful!