Portable Dispenser

Portable dispenser is a series of tools heating once the tool cooler water that is multifunctional because it can be taken anytime and anywhere

Supplies

Ingredients:

1. 2 Bottles and Caps

2. Perltier TEC-12706 Module

3. 2 Heatsinks

4. Duct Tape

5. 2 Rings

6. Sling Bag

7. Female Cable

8. 2 Water Taps

9. Adaptor

10. Carton

Tools

1. Solder

2. Glue

3. Cutter

4. Marker

Step 1: Make a Hole That Bottle for a Size Same As With Heatsink

Step 2: Put Heatsink in the Hole That Make It and Glued on the Side by Side

Step 3: Make a Hole for Size a Tap That on Side Was Different With Heatsink

Step 4: Put the Tap in the Hole Which Has Made and Glue on the Side of the Tap

Step 5: Create a Series Consisting of Perltier Module, Female Cable, and Adaptor

Step 6: Clamp the Perltier Module Between 2 Heatsinks

Step 7: Duct Tape the Bottle to Make It Stronger

Step 8: Please Written for Different on the Side That Is Hot and Cold

Step 9: Stick It a Ring on the Side of Up on the Bottle

Step 10: Connect It With Sling Bag

Step 11: Connect the Female Cable to Adaptor and the Adaptor to the Mains­­­­

Step 12: Give a Water for Two Bottles Hold on 15-20 Minutes

Step 13: Put a Cover Bottle As a Glass

Step 14: Last, If the Water Already Hot and Cold Ready to Drink