Pump-Action Shotgun V3

Intro: Pump-Action Shotgun V3

Finally,after a long break from knex building, I decided to build it, V3 of my shotgun line-up.Though it doesnt feature rapid-fire, like my previous model, but I think is more realisticly built.The trigger mechanism looks flimsey,but is ironically less complicated and much stronger than the other mechanisms.Here are the performance statistics;
PROS
-very realistic design
-easy to pump
-ammo spreads
-sight
-less skeletal and more attractive midsection
CONS
-not the greatest magazine (4 shots)

STEP 1: Piece Count

As requested by Visper123,here is the piece count:
RODS
green/black rods X 59
silver/white/black rods X 41
blue rods X 10
yellow/gray rods X 2
black/transparent/gray rods X 4 (prefferably one black/clear one for use as ram)
(optional) green/purple bendy rods X 2

CONNECTORS
half-moon 5 slot X 46
2 slot i connector X 12
4 slot connector X 8
2 slot v connector X 6
1 slot connector X12
3 slot right angle connector X 11
7 slot 3d connector X 2

MISCELLANEUS
blue spacers X 6
grey spacers X 4
hinge X 1
blue tan X 1
female joint piece X 2
y connector X 1
tan connectors X 4
black wheels X 4

STEP 2: Handle and Trigger

I wont give the little numbers up here like I usually do. Its pretty straight-forward.

STEP 3: Pump

Again,not very hard.

STEP 4: Nose/Barrel

Sorry guys,but it wont let me post any more pictures because it exeeds size limit.To continue go to my profile and then part 2 of instructions.

Comments

[Jedi_man]

Yessss black wheels are only for decoration... is that true?

[171292]

COULD SOMEBODY PLEASE POST SOME MODS FOR THIS??????????

[H1T4TCH1]

Make 'em yourself?

[NoVa2k11]

I made a smaller version of this .Good gun 4.5

[slimshaddy]

i made this gun and i modded it to have a mag that takes orange connectors with green rods on the the end.

[pikmin205]

PLZ post a new mag. i dont really know how to make them well... and ive been searching for about 4 hours on how to make one.

[smashpoe]

join the club, i cant build mags worth crap either, dont stress yourself with it either, theres plenty of other better guns

[iloveemogirls]

it looks sick and easy to make im building it tommrow cant wait rapid fire pump action XD

[knexsniper123]

the trigger sucks

[~Aeronous~]

 WAHOOOOH!!!
thanks 4 putting me up their lolz.

[smashpoe]

your welcome ; )

[~Aeronous~]

 BTW finished this and it badly needs modding, its PUMP mech, is faboulous, as is its trigger mech, but the barrel and mag need modding.

[smashpoe]

I know the magazine sucks, but whats wrong with the barrel?

[~Aeronous~]

 its too wide, so the trigger will go to one side, and the ram rod to the other. please explain, I can't see how this shoots 4 at once, it only has one ramrod.

[smashpoe]

really? thats odd.Ill follow my instructions and see whats wrong.dont expect it to happen today, i gots to clean the kitchen and go to bed early.im sick

[~Aeronous~]

 well I'm working on it nao, so the problem should be solved in about 1hour.
do you have aids or is it just a cold. hope you get better soon.

Matt.

[smashpoe]

thanks, csc (cant stop coughing)

[~Aeronous~]

if you have a dry throat, try getting water, leaning your head back, and gurgling it for a while. it doesn't always work, but its worth a try.

[~Aeronous~]

YES! finnally you said you would post it.
well done on finnally posting an ible (even though it doesn't have instructions) i look forward to building this and modding it to make it even better!

[smashpoe]

Like it says in the description, instructios soon ( probably by tomorrow)