Jedi_man

Very interesting mechanism! I may try and make a larger version of this.

Thanks! I got some good stuff coming up :)

Actually, I was thinking about taking this further and that was one of my options. I never thought about making it into a shotgun! I'll be looking forward to seeing it!

Looks like the pictures are a bit fuzzy. I may retake the pictures in the future if you guys want.

Thank you, I appreciate hearing from one of the best K'nex gun makers. Means a lot.

Interesting mechanism :)

The middle layer is a 1x3, a 1x2 with one stud off to the side, and another 1x2.

Haha, hope you enjoy it! If you run into any problems building it let me know.

Try a thin layer of tape around the button? I have not tried that solution but it may work.

Thank you!

Made me cringe when I saw it. Nice

I made it, after stockpiling pieces for months. It's quite possibly the most fun-to-shoot K'nex gun I've ever made. GREAT gun and 'ible!

Really nice! So the drawer slides out? Here's how to fix it: Put some tape (Any kind) on the tiles that the drawer slides on (They are on the base of the box) to add friction. If it still slides out, Add some tape on the top and/or bottom of the drawer as well. I hope that helps, and thank you for building!

Nice box! I really like how it looks too.

Yeah, it is pretty tricky to open even if you designed it, especially if you're trying to film a smooth opening video :X Trust me, that video took many attempts!

Thank you, it means a lot.

I had to stockpile pieces from the thrift store :)

I miraculously found enough pieces for this, although I had to take apart a few things. I don't have the rubber bands though... I'll have to buy some. I've been wanting to make this for months! I'll tell you when I'm done :)

No problem. Glad you like the instructible :)If you have a good amount of LEGO bricks, you can possibly substitute most of the pieces.

Instructions made for Diamonds :)

Instructions will come this week

Instructions will come this week

Thank you! I'll post instructions for it, thanks for asking! And sorry for the late reply.

I love doing this :) I do it ALL the time.Now more people will find out about the joy of exploding water bottles :D

This was a very fun build! Very good instructions.I've always wanted to make one of these boxes :)

You may be able to remove some of the green rods on the yellow connectors. Some shrapnel may slip out though. Experiment!

I believe you can remove 16 green rods from the yellow connectors. Some shrapnel may slip out though, if that happens, just experiment with different shrapnel.

I built it, but unfortunately it didn't work for me. I'm sure it's a great gun when it works though!I decided to make a parts list while disassembling it.-----Rods: 234-----Green: 146White: 64Blue: 19Red: 5-----Connectors: 210-----Grey: 55Light Grey 2-Way: 5Orange: 25Red: 17Green: 17Yellow: 79White: 6Blue 3-D: 6-----Misc: 26-----Y Connector: 8Tan Connector: 3Metallic Blue Connector: 4Male Ball Joint Connector: 1Black Hinge: 2Blue Hinge: 2Blue Spacer: 6-----Total: 470-----You're welcome :)

I built it, but unfortunately it didn't work for me. I'm sure it's a great gun when it works though!I decided to make a parts list while disassembling it.-----Rods-----Green: 146White: 64Blue: 19Red: 5-----Connectors-----Grey: 55Light Grey 2-Way: 5Orange: 25Red: 17Green: 17Yellow: 79White: 6Blue 3-D: 6-----Misc-----Y Connector: 8Tan Connector: 3Metallic Blue Connector: 4Male Ball Joint Connector: 1Black Hinge: 2Blue Hinge: 2Blue Spacer: 6You're welcome :)