Quick Start Guide to 3Doodler 2.0

Step 1: Getting to Know the 3Doodler 2.0

Step 2: Turn It On

To turn it on plug it in and then move the switch to high or low. (PLA/wood) lo (ABS,Flexy) high

Step 3: Wait for Light to Indicate It Is Ready

If you set it for "lo" the light will turn green. If it is set for "hi" then it will turn blue.

Step 4: Insert Plastic

Put the plastic in the in the plastic in port and push it until it clicks

Step 5: Start Doodling :)

Thank you for reading. Please vote:)