Railgun Pistol (Instructions)

Intro: Railgun Pistol (Instructions)

This is the instructable for my Railgun Pistol. Please rate, comment, and subscribe.

Here is the part list. Thanks to headlessknight for making it.
RAILGUN PISTOL PART LIST

CON

YELLOW - 13
WHITE - 14
GREEN - 2
RED - 11
ORANGE - 21
DARK GREY - 9

RODS

GREEN - 77
WHITE - 11
BLUE - 17

MISC

BLUE CLIPS - 2
TAN CLIPS - 1
BLUE SPACERS - 8
FEMALE BALL JOINTS - 1

STEP 1:

Here you will build the gun.

Image 1 : Build these pieces.
Image 2 : Build this. It is the firing pin.
Image 3 : Here is another view of one of the pieces from image 1. Put the firing pin in the gun also.
Image 4 : Here is a view of the trigger.
Image 5 : Put the other panel from image 1 on the other part.
Image 6 : This shows how far to put the bullet in.
Image 7 : Put the red connecter were it is shown.
Image 8 : Put this piece on the gun.

STEP 2: You're Done!

Thanks for building my Railgun Pistol. Have fun with it, and be sure to subscribe.

Comments

[SomeAsianKid]

How does this shoot?

[ProtectTheAlphaWolf]

You pull back the firing pin, and you put a yellow rod in the front of the barrel

[daredevil499]

nice gun.5 stars.

[~KnexBuild~]

Thanks! =D

[daredevil499]

your welcome

[~KnexBuild~]

Do you build K'nex guns?

[daredevil499]

yes and i am working on a semi-automatic handgun

[headlessknight]

RAILGUN PISTOL PART LIST

CON

YELLOW - 13
WHITE - 14
GREEN - 2
RED - 11
ORANGE - 21
DARK GREY - 9

RODS

GREEN - 77
WHITE - 11
BLUE - 17

MISC

BLUE CLIPS - 2
TAN CLIPS - 1
BLUE SPACERS - 8
FEMALE BALL JOINTS - 1

here you go

[~KnexBuild~]

Thanks for making the part list. I'll add it to the instructable