Removing Security Torx (Star) Screw With a Flathead Screwdriver

700,010

20

70

Introduction: Removing Security Torx (Star) Screw With a Flathead Screwdriver


Security Torx screws, the six-pointed star-shaped screw heads with the pin in the middle, are used in many digital objects to prevent tampering. Removing a security torx screw can be a hassle for those without the tool. Once, however, I broke (NOT broke into, broke) a safe in a hotel room and, not wanting them to charge me excessive amounts of money for a simple repair, decided to take it apart myself. I discovered that only a small flathead is required. Oddly, this method only works on security torx, not on non-security ones.

Step 1: Aquire Your Items

To remove a security torx screw, you will need:
1) A small flathead, depending upon the size of the torx head. It will probably be a flathead.
2) The device you are attempting to access.

Step 2: Remove the Screw

Insert your small flathead into the space within the screwdriver head as shown here, and simply turn clockwise. The screw will easily come loose. Congradulations!

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest
    • Battery Powered Contest

      Battery Powered Contest

    70 Discussions

    0
    Indyjps
    Indyjps

    2 days ago

    Nice. Ive been using a recessed tip nailset and hammer to snap the pin off.
    I tried a hardened flathead screw bit in a ratchet and they popped the pin out very quickly without risking my flathead screwdrivers.

    0
    Tchernobog_
    Tchernobog_

    1 year ago

    Instead of loosening the screw, the center post broke and I used a normal Torx bit.

    2
    PhreakOneTwo
    PhreakOneTwo

    4 years ago

    Just to note : This will only work if your screws a lightly torqued. Otherwise, you will probably bend the sh*t out of your small flathead. So bye bye flathead, and still no torx screw removed.

    You can purchase an "8 in 1 Torx Screwdriver Set - T4 T5 T6 T7 T8 T9 T10 T15" for $3.08 CAN from Amazon. This is the smarter choice.

    0
    Juan CarlosG2
    Juan CarlosG2

    Reply 1 year ago

    That is true. I ended up breaking three of my flathead tips, it's just best to use the right tool for the job

    0
    blamaster27
    blamaster27

    1 year ago on Step 2

    wow thanks. im repurposing an extra x box 360 controller

    0
    gemcaster0
    gemcaster0

    3 years ago

    I did this and the middle of the srew broke off

    0
    gemcaster0
    gemcaster0

    Reply 3 years ago

    So can any help me because I still need to get the srew off

    0
    WilliamC279
    WilliamC279

    Reply 2 years ago

    buy a cheap torx driver kit, they are like 10 bucks

    0
    al.catraz.106
    al.catraz.106

    Reply 2 years ago

    Yes, it's only $10 --- but the time is 3AM, and I am in Death Valley, and I need to get my car going.... GOT IT?

    0
    Bannef
    Bannef

    Reply 1 year ago

    I know this is much too late to help you (and that sounds like a real frustrating experience, I hope you got out safe!), but for anyone reading without much experience - if you have a many-in-one screwdriver (mine is a Lutz 15-in-one) you might have a regular Torx head already. It doesn't have a Torx security head (mine doesn't at least), but once you've broken the middle pin, the normal one will work.

    1
    al.catraz.106
    al.catraz.106

    2 years ago

    As I was trying to use the flat-screwdriver... it actually broke the pin... used regular torx.. :-)

    0
    Bannef
    Bannef

    Reply 1 year ago

    Same! Best case scenario, in my book.

    0
    soura1
    soura1

    2 years ago

    You have to use a small themostat flat head. I did it and it worked. The only issue i had was the last one that was bent and didnt wanna turn. I was able to get in the air machine.

    0
    auto13142828
    auto13142828

    2 years ago on Step 2

    First screwdriver tip bent. Next one slipped. The screw is froze and I
    can't get enough torque to turn it. This trick may end up stripping it
    out.

    1
    MichaelS918
    MichaelS918

    2 years ago

    Actually, a flat blade screw drive WILL work for taking non tamper proof torx screws out. I know. I did it during my 10+ years as an auto repair tech.

    0
    RickC156
    RickC156

    2 years ago

    Learned jury-rig'n from my dad while grow'n up! Excellent article people! ( I been drilling out the centers on S-Torix screws! "Duh"?) I will definitely post when finished. Les doy las gracias!!

    1
    MitchellS51
    MitchellS51

    2 years ago

    Worked like a charm; as a matter of fact the first one came out with a small flathead and the second one I broke the pin and was able to use my torx bit! Thanks for the great idea, never would have thought about it!

    0
    Assassin456
    Assassin456

    3 years ago

    Hello. Which size screwdriver do u need for this to work on a PS4 security screw? plz help

    0
    OmarJ3
    OmarJ3

    3 years ago

    Re the diagram, to summarize, if possible, chip the center stud out and insert a flat blade across 6 to 12 o'clock. Otherwise, try for 6 to 2 o'clock. On most cheap assemblies, the screw will loosen anti-clockwise. Step #2, replace with equal size Allen socket head, Hex or Phillips head screw.

    0
    MarkE162
    MarkE162

    3 years ago

    I just tried your suggestion. the small flat-head broke off the security "post" and i was able to use an ordinary Torx.