SHOTGUN MOD!!!!!!!!!!!!!

26K1536

Intro: SHOTGUN MOD!!!!!!!!!!!!!

In this instructable, you will learn another way how to make a shotgunish like shot from the following materials:

 2 Plastic forks (or any small particle)

a nerf blaster with barrel

Two simple materials. If this is hurtful, then use gloves or something. :)

(((NOTICE:I'M NOT RESPONSIBLE FOR ANY FACE OR SERIOUS INJURY)))

I suggest the following Nerf blasters:

Recon CS-6

Longshot CS-6

Longstrike CS-6

Stampede CS-18

Barrel Break IX-2

Double Shot

Raider CS-35

Alpha Trooper CS-18

Rapid Fire Tek

Reactor

Buzz Saw

Or anything else I didn't mention.

STEP 1: Breaking.............

  Take the forks and break the ends off (including the handle).

STEP 2: Loading............

  To load it, you'll have to load it light a musket (putting the forks particles down the barrel(s))

STEP 3: FIRE!!!

  Fire, but remember that most shotguns shoot short range.

   This mod is much better then the other shotgun mod "My Shotgun/Rifle Mod" that I did.






(((((((((((((((LARRY))))))))))))))))))

36 Comments

Kind of cool but at the same time pointless, there is no practical use for it because of its lack of power

WOOT

:] u hv 10 496 views
Woohoo! You mean 10,948.
10836 views
10,845 views. Ha! They changed some colors around here and added a blog link on the top! And has fixed the library glitch! I feel happy!
Oh! I'm more busier than a fast food resturaunt!
how could u do this with the buzz saw if i remember its a ball shooter that u keep pulling the handle and it makes an annoying noise then u pull the trigger
It's the Barrel Break (only in Toys R Us). It's good if you mod it...
I don't believe that the weak air power can make the fork come out at all.
Oh. Sorry for replying so late. You put the darts in and the darts push the forks out. The air isn't strong enough, but the darts coming out will push the bits out with it.
More Comments