Simple USB Charger

Introduction: Simple USB Charger

note: you can't depends this charger Except in emergency cases because it may affect on the life span of the battery

Step 1: Component That You Need

1- 9v battary

2- battary Socket

3- 100nf capacitor (2)

4- 100mf capacitor

5- 74mf capacitor

6- resistor 470ohm

7- led

8- USB socket

9- regulator lm7805

10- switch

Step 2: The Circuit

you can build your circuit online at this site

www.circuitlab.com

Step 3: The Final Result

After connecting the circuit it will be like that and it will be ready to charge your mobile

Step 4: My Mobile Connected to the Charger

Make It Glow! Contest

Participated in the
Make It Glow! Contest

Be the First to Share

    Recommendations

    • Make it Glow Contest

      Make it Glow Contest
    • First Time Author Contest

      First Time Author Contest
    • PCB Challenge

      PCB Challenge

    9 Discussions

    0
    vickydragon
    vickydragon

    5 years ago

    how many hours does this circuit take to charge :)

    0
    Gomi no Sensei
    Gomi no Sensei

    5 years ago

    Most smart phone batteries are 1500-3300mah.

    A 9V battery has 50-400mah and at 500mw load has less than 300mah capacity.

    You're also losing 30% of that 300mah thru the 7805 as heat.

    Just exactly HOW much does this remaining 210mah charge your phone ???

    Ref : http://www.powerstream.com/9V-Alkaline-tests.htm

    0
    Dylan91
    Dylan91

    5 years ago

    cool project nice tutorial:)

    0
    MohamedM10
    MohamedM10

    Reply 5 years ago

    thanks :D

    0
    the Dark One
    the Dark One

    5 years ago

    how many mAh can deliver with a9V battery?

    0
    MohamedM10
    MohamedM10

    Reply 5 years ago

    9v battery gives about 400 to 500 mA per hour

    0
    tomatoskins
    tomatoskins

    5 years ago

    Such a cool design. What do c3 and c6 do?

    0
    MohamedM10
    MohamedM10

    Reply 5 years ago

    to Slow the charging process as much as possible