Stenciling

37,176

90

29

Introduction: Stenciling

recently i have become addicted to stenciling and i think that it would make a great instructable. in this i will teach you how to transfer images from the internet or your mind onto a re-useable stencil sheet.


this is my first instructable hope you like it.

Step 1: What You Will Need

for this you will need:
1x scissors
1x sharp knife
1x transperrant paper (the kind you use on old projectors)
1x permanent marker
1x spray paint/normal paint (any colour)

and something to transfer your design onto

Step 2: Getting the Image

all you need for this is a simple design other wise you will find it is hard to cut out. i used a design ive had on my computer for a long time and printed it. you can draw your own designs aswell.

Step 3: Transfering Design

This is the second easiest step of the process i cant really explain it in more detail because all you have to do is place the transperant paper over the desicn and copy it onto it.

Step 4: Cutting It Out

the name says it all but this step is the most difficult because you need to take you time to cut it out. you can either cut it all out completly with your knife or you can cut it out with your knife and use scissors aswell so that you dont slip and destroy all your hard work. i find it easier to use just my knife because its sharper but it all depends on the degree of difficulty of your design.

Step 5: Spray and Wait.

for this step all you have to do is paint your design onto something.

i would like to see what people come up with so if you finish this could you please post your final products thanks

Be the First to Share

    Recommendations

    • Knitting and Crochet Speed Challenge

      Knitting and Crochet Speed Challenge
    • Make it Glow Contest

      Make it Glow Contest
    • First Time Author Contest

      First Time Author Contest

    29 Discussions

    0
    FrozenIce
    FrozenIce

    9 years ago on Step 5

    haha like it alot :) might just try it!! but to find the right thing to stencil...

    0
    czintx
    czintx

    10 years ago on Introduction

    Do you have any suggestions for doing a stencil for an object that is not flat? How might I get it to stay on? Thanks.

    0
    egadsman
    egadsman

    Reply 10 years ago on Introduction

    well there is a way but the more intricate the shape the harder it will be. the only way i can think of is to go down to your local department store and buy some contact cover for books and cut your stencil out of that and stick it to your object and then paint and remove it when its dry.

    0
    czintx
    czintx

    Reply 10 years ago on Introduction

    Thanks! I'll give that a try.

    0
    flytape8490
    flytape8490

    10 years ago on Introduction

    Cut out one step-
    Don't transfer to the transparency sheet. Not only will your knife stay sharper longer when cutting, reducing the ammount of (expensive!) blades you go thru, you're honestly saving a lot of time.

    Also, a hit of spray adhesive on the back of the stencil, and left to dry for 5 minutes or so, will make for a very clean image by almost completely eliminating any overspray. Don't use too much tho if you care about presentation (esp. on a black surface). It will leave a residue that is very visible.

    0
    lucille3830
    lucille3830

    11 years ago on Introduction

    do you think this method will work with etching products-or do you think it will dissolve the vinyl?

    0
    Potaterchip
    Potaterchip

    11 years ago on Step 1

    This is great! This is the only stencil instructabel that uses household items. No laser cutters or anything. Thanks a lot.

    0
    stkrzysiak
    stkrzysiak

    13 years ago on Introduction

    How exactly would spray adhesive help? I saw that mentioned in the discharge paste instructable, and didn't get it. If you glue the stencil to something, how would you get the stencil off? Is the assumption that you can just pull it off since spray adhesive is not that stong?!?

    0
    eskimojo
    eskimojo

    Reply 12 years ago on Introduction

    If you use it correctly, spray adhesive is only temporary. So yes it has that "post-it effect." If you go liberal with it things can get hairy, literally and metaphorically.

    0
    ultrastatic
    ultrastatic

    12 years ago on Introduction

    Better to do it with tape as a stensil because there is less fog around the edges

    0
    enahs
    enahs

    13 years ago on Step 3

    another option would be to just print the design strait to the transparent sheet with a laser printer.

    0
    noremakk
    noremakk

    Reply 13 years ago on Introduction

    Or you could even just print the design on normal paper and make your stencil out of your standard printer-paper.

    0
    Esmagamus
    Esmagamus

    Reply 12 years ago on Introduction

    He probably choose to use the transparent sheet because: (a) it won't tear easily while it is being cut and (b) unlike paper, it won't stretch because paint can't soak it and (c) the same amount of work makes for a much tougher stencil that can be used endlessly. Even better, having a laser cut stainless steel sheet as a stencil. Sometimes the hard way is also the lazy way.

    0
    gonnesouth
    gonnesouth

    12 years ago on Step 2

    they sell printable transparent paper too, that would eliminate a step for you

    0
    Dr.Paj
    Dr.Paj

    12 years ago on Introduction

    I'm wondering, would the lines of paint be more crisp if you put something like oil or vaseline under the stencil (not too much just enough to keep it from moving and remove any gaps) before placing it on something, say metal or concrete? Or do you think it would just create a larger mess?

    0
    egadsman
    egadsman

    Reply 12 years ago on Introduction

    yeah that might work, but the vaseline and the oil would have their downsides because it would make the stencil slip more so it has both a positive and a negative effect. if you want the most optimum results you are best off using a spray adhesive.

    0
    Dr.Paj
    Dr.Paj

    Reply 12 years ago on Introduction

    Spray adhesive would work the best hands down, but I was trying to think of ways to get a crisper look using things laying around the house without having to leave for the store to buy materials.