Introduction: Streethawk LED Effect

Within the first 3 seconds of the attached youtube video, you can see the LED effect we are trying to recreate.

Step 1: What You'll Need:

USB Cable

Arduino Uno

12 Red LEDs

12 Resistors

Solderless Breadboard

13 Connectors

Step 2: Basic Setup:

Attach LEDS, resistors, and connectors to breadboard - as seen above

Attach ground connector to ground (GND) and attach the remaining connectors to digital inputs 2 through 13, on the Arduino.

Step 3: Arduino Code

Upload code to your Arduino and enjoy!