Terminator Gas Bottle Log Burner
Intro: Terminator Gas Bottle Log Burner
My first step was to find an image to base my design on.
STEP 1: Bottle It
Find yourself an empty gas bottle. This should be from a company that has gone out of business as gas bottles remain the property of the company for the entirety of their lives. Make sure it is empty, carefully remove the carry handle then use a hack saw to remove the tap on the top. I then fill with water to displace any left over gas. I used a wire brush attachment for my grinder to remove the paint then magic marker penned my design on to it.
STEP 2: Get Hammered
STEP 3: Bend and Shape
STEP 4: Fill in the Brow
STEP 5: Facial Features
STEP 6: An Eye for Detail
STEP 7: Jaws of Death
STEP 8: Pearly Whites
STEP 9: Detail
STEP 10: Rear Entry
Although it would have been nice to have the burner open from the front I was worried about ruining the work I had already done. The hatch was created in the rear to the bottle. I used a 75mm weld on hinge to attach the door.
STEP 11: Grind Polish Paint Lacquer
Check out my other designs here https://www.facebook.com/pages/Burned-by-Design/1526857080886471
Design requests to alex_dodson7@hotmail.com
Comments
r.tisdale 9 years ago