Introduction: The Igloo (Ice House)
I put a Neopixel Christmas Tree Light I made. It was more beautiful than I expected!
As you can see, there are blocks side by side.
Each block are made by the molding printed by using the 3d printer.
Let me share how to make it
Step 1: Download 3d Modeling
Step 2: About Molding
There is a long strip on the one surface of block molding. It indicates upside. It costs around 10 Euros for printing out.
Step 3: Print Out Modlings
Print out one by one by using 3d printer
Step 4: How to Build Layer by Layer
You don't need to print out like this image. This picture just shows how to construct. Each layer needs a one block molding. (If you have time, you can print out a couple of block molding. because it takes time to make a snow block)
Step 5: Construction
You can make an igloo, like this.
One supplies a pile of snow, and the other makes a block using the block molding.
The roof is hard to make.
You need to use one or two blocks for finishing the roof.
Step 6: Put Any Lights Such As Christmas Light
You can put any of Christmas Tree Light. It will be amazing! If you are interested in making your own, click it.
About the maker
Youtube Channel http://www.youtube.com/EunchanPark