The MMM- Build It

You will need:
Connectors:
5 yellow
5 orange
4 green
3 grey (mine are orange in the pics) (2 capped)
2 white
1 red
14 one-capped dark grey
1 blue tan
1 tan 
Rods:
7 blue
2 red
9 white
10 green
Other: 
3 rings (blue)
elastic bands
the black thingymagij

Step 1: Make the Barrel

Make this

Step 2: Finishing Off the Barrel

Step 3: Make the Handle (1 of 2)

Step 4: Make the Handle (2 of 2)

Step 5: Add the Handle to the Barrel

note at the bottom of the handle on the picture it shows a white rod. on that white rod is a grey two capped connector. add this to your gun.

Step 6: Make the Trigger (almost There)

Step 7: Make the Rest of the Trigger and the Ram

Step 8: Add Elastic to Cushion the Ram

Step 9: Add the Trigger to the Gun

Step 10: Add the Elasticated Ram to the Gun

Step 11: Rubberband It and Load It