The NB-4 Pistol
Intro: The NB-4 Pistol
Check my Sipriani V3.0 too!
Here it is!
It's a powerful 5 shot gun with an average range of 50 to 60 ft.
If you're bored or something try to decode the name.
I especially like this gun because of it's smooth lines and it can pack one heck of a punch for a gun of it's size.
Heres some pro's and no's:
Pros:
-Great Range
-Great Performance
-Magazine never jams
-Looks "slick"
No's:
-Lots of parts for a pistol
-A 5 shot mag which might be short when you're in a knex war (The El Diablo's mag can be used on this gun if you want to go in combat).
Like it?
Building time, then!
Here it is!
It's a powerful 5 shot gun with an average range of 50 to 60 ft.
If you're bored or something try to decode the name.
I especially like this gun because of it's smooth lines and it can pack one heck of a punch for a gun of it's size.
Heres some pro's and no's:
Pros:
-Great Range
-Great Performance
-Magazine never jams
-Looks "slick"
No's:
-Lots of parts for a pistol
-A 5 shot mag which might be short when you're in a knex war (The El Diablo's mag can be used on this gun if you want to go in combat).
Like it?
Building time, then!
STEP 1: Strength Sides
These parts are for added body strength and might even be required for a gun that must be able to survive itself.
STEP 2: Mag Sides
These are the mag sides which keep the bullets in place.
STEP 3: Mag Pusher
This is the part which pulls up the bullets for a auto-reload
STEP 4: Firing Rod
This part is the part which actually fires the bullets.
I used a small amount of tape first, and then a rubberband wrapped around it, to make it less of an impact on the gun.
I used a small amount of tape first, and then a rubberband wrapped around it, to make it less of an impact on the gun.
STEP 5: Trigger
This is the new trigger.
It's asymetrical, so you might have to put the tans on the other side of the trigger if you're a righty.
It's asymetrical, so you might have to put the tans on the other side of the trigger if you're a righty.
STEP 6: Mag Front and Rear
These bits are the actual mag tip.
STEP 7: Handle
Having trouble?
Ask it in a comment.
Ask it in a comment.
STEP 8: Barrel
This is the part which holds the loaded bullet until it's fired.
STEP 9: Assembly
Having Trouble?
Ask it in a Comment and i'll reply as soon as possible.
Ask it in a Comment and i'll reply as soon as possible.
STEP 10: You're Done!!!
Well, well, well.
You've got yourself the first NB-4 weaponry.
Have freaking much fun with my knex guns!!!
-Viccie.B1993-
You've got yourself the first NB-4 weaponry.
Have freaking much fun with my knex guns!!!
-Viccie.B1993-
267 Comments
KnexFreek 14 years ago
The NoodlesBeefcake-4 Pistol
Seleziona 14 years ago
KnexFreek 14 years ago
Aggressive ghost 132 3 years ago
~KnexBuild~ 12 years ago
~Meme~ 12 years ago
Fred the evil puppet 13 years ago
Skreetsha 13 years ago
skyfaller 13 years ago
Skreetsha 13 years ago
skyfaller 13 years ago
DracoUltima 13 years ago
Skreetsha 13 years ago
DracoUltima 13 years ago
Skreetsha 13 years ago
DracoUltima 13 years ago
SomeAsianKid 13 years ago
SomeAsianKid 13 years ago
rrr67 14 years ago
killersir751 13 years ago