The Tech Tree!!!

Introduction: The Tech Tree!!!

About: I am from Thessaloniki Greece! I love the world of electronics in every step of my life! I am electronic engineer and my hobby is my job!The summer of 2014 i'm raedy to begin my own company oramasolutions aft…

Hi everyone,

First of all i would like to tell you that this is an "LED CONTEST" instructable so please vote if you like the project!

The idea came when i realized that i managed to gather a lot of remaining wires of components after cutting them for a pcb work.

There was in my bag handrents of them...

Step 1: Stuff You Need

1.Soldering iron
2.Soldering wire
3.A green led or other you like
4.Usb jack typ B Female for power up
5.A resistor 33 ohm
6.Usb cable type a to type b
7.Plenty of remaining leads
8.A breadboard or an empty pcb.I used an empty pcb 5x5 cm
10.Another person to help you
11.Optionaly a base for the pcb for stability...

Step 2: Begin Building the Tree

So i took a pcb board with a usb Type B power input and i start to build my tree with the help of my wife!
I make some modifications under the pcb so the power of the usb port came to my leds through a resistor..
After  i took an aluminium base and i mounted the pcb...

Step 3: Powering Up the Kit

You can power up the led via a usb type b cable from your pc usb output or from any other usb charger....
I love them both...
Watch it!!

The result is simply amazing!

Please feel free to ask me anything...

LED Contest with Elemental LED

Participated in the
LED Contest with Elemental LED

Be the First to Share


    • Cardboard Speed Challenge

      Cardboard Speed Challenge
    • Digital Fabrication Student Design Challenge

      Digital Fabrication Student Design Challenge
    • Go Big Challenge

      Go Big Challenge