Ties to Swirly Hat
Intro: Ties to Swirly Hat
Ties are SOO cool to work with....
I have this box full of them and I recently published an instructable on how to make a padded glasses case.
Alex in NZ commented and this sparked the idea for
THE HAT!!!
STEP 1: The Brim
Before I started sewing I measured my head and then picked the right number of ties.
Six.
I then sewed the first inch or so of the ties together. After that I put them on the glass head and designed the rest of the hat directly there.
STEP 2: Shaping the Hat to the Head
I realized, that one inch wouldn‘t be enough to really start shaping the hat, so I sewed the first 10 cms (4 inches) of the ties together.
Then I layed the ties over the glass head and fixed them in place with needles. I sewed the first seam and then repeated the same mirrorwise on the other side.
I worked my way around the head until I had a very nice hatshape.
STEP 3: Adding the Wire
NOW the fun part!
I took some aliminum wire and rounded the tips so that they wouldn‘t pierce the fabric.
I then inserted one wire per tie and pushed it all the way to the tip.
Then I took the longest tie and wound it around all the ties to form something like a knot for a ponytail.
STEP 4: Sculpt Away
Now I formed and shaped and loved the look!
I will have to use hairpins to fasten the hat to my head, but I am SOO looking forward to wearing it!
😀🦑🎩
9 Comments
Vibrational Frequency Rising 3 years ago
Disembo 3 years ago
knopfling 3 years ago
Thanks! It actually does move when you wear it! Moves with you.
JustineM32 3 years ago
Nice job. :D
knopfling 3 years ago
Meglymoo87 3 years ago
knopfling 3 years ago
Penolopy Bulnick 3 years ago
knopfling 3 years ago
I am quite astonished how it turned out. Way above my expectations. It was a super fun project!