An Easy Tinkercad Instructables Robot

I made a recreation of Instuctable's loyal yellow robot in Tinkercad. I found its design an interesting one with all sorts of parts, and that made me want to try designing it.

Supplies

A computer

An account to Tinkercad

This can be done by beginners.

Step 1: Legs

For the robot's legs, I placed a cylinder. I lowered the sides to 12 and increased the Bevel to 2.5. (Panel on the right side.) Then I duplicated the leg and slightly rotated it.

Step 2: Body

For the body, I added a half circle, stacked it on top of the legs, and made it larger. To stack objects, hold them until a small triangular shape comes up. Click on that and bring the shape up.

Step 3: Feet

The robot has circular-wheel feet. I made 2 circles and placed them directly under the legs. Same way as stacking, just going under.

Step 4: Rectangle Button

You can observe a rectangular button on the robot's body. So I added a thin rectangle.

Step 5: Circles

The robot also has 3 circles on its body. They are above the rectangle, almost parallel.

Step 6: Head

I added a square head on top of the body.

Step 7: Ears?

I added two circles on the sides of the robot's head, as shown.

Step 8: Done!

This is my finished result.