USB Dice Keychain
Intro: USB Dice Keychain
Here is my USB dice keychain.
Here are some pictures of the final product!
Please rate comment and VOTE ;)
Here are some pictures of the final product!
Please rate comment and VOTE ;)
STEP 1: How to Begin
Here are the two original dice and some of the tools I used.
I took the old USB stick out of its old cover and marked one die with a sharp knife
I took the old USB stick out of its old cover and marked one die with a sharp knife
STEP 2: Milling/Drilling
Now I milled around the marked egdes. After that I drilled holes with the depth of half of the USB stick. Then I smoothed the edges inside with an other milling tool, so that to USB stick fits inside.
STEP 3: Holes
These are to holes for the small thread to tie it up to the keys.
STEP 4: Final Assembly
I did the same drilling and milling procedure with the second die. After a final smoothening by hand I fixed the USB in the die with some hot glue.
Now you can put the two parts together and you are done!
Please rate comment and VOTE ;)
Now you can put the two parts together and you are done!
Please rate comment and VOTE ;)
12 Comments
Spade115 12 years ago
FredLB 12 years ago
Simple but good stuff !
I do this as soon is possible ...
Win Guy 12 years ago
Win Guy
Kellye8498 12 years ago
pch1 12 years ago
sloftin 12 years ago
splazem 12 years ago
Monsterguy 12 years ago
Nice 'ible :)
bgulmon 12 years ago
pch1 12 years ago
bgulmon 12 years ago
ChrysN 12 years ago