Introduction: Wooden Tiger Toy
How to make a wooden tiger pull toy for a child.
Step 1: Step 1: Gather Supplies:
1. Safety Googles
2. Band Saw
3. Belt sander
4. Orbital sander
5. Drill press
6. Axles and 1" wheels
7. Router table
8. Orange stain and paint
9. Wood glue
10. Cardboard scrap
11. 2"x6" scrap wood
Step 2: Step 2: Find a Picture of Your Animal
Find a picture of the animal of your choice that can be recognized from the side.
Step 3: Step 3: Trace Picture Bigger
With a sharpie outline the picture to make it easier to cut, but still a noticeable animal.
Step 4: Step 4: Make a Template
Trace the animal of choice on a piece of cardboard so its easy to cut out.
Step 5: Step 5: Cut Out the Template
Cut out the template on the cardboard with a razor blade or scissors if it is easier.
Step 6: Step 6: Trace Animal on Toy
With the cut out piece of cardboard, put in on a piece of 2"x 6" piece of scrap wood and trace it.
Step 7: Step 7: Cut Out the Traced Toy With a Band Saw
Follow the trace marks with the band saw to cut out the shape.
Step 8: Step 8: Sand With a Orbital Sander and Belt Sander
After done cutting, sand the sides with an orbital sander and the insides with a belt sander.
Step 9: Step 9: Router Edges
With a 1/4" round over bit, router the edges of the toy to make it rounded and smooth.
Step 10: Step 10: Drill Axle Holes
With the drill press drill two holes so you can put axles and wheels on.
Step 11: Step 11: Create a Painting Plan
On a piece of paper, draw how you are going to paint your animal.
Step 12: Step 12: Painting and Staining
Start painting your toy with the design that you like. You can also use stain if you want.
Step 13: Step 13: Final Project
This is a super easy and fun toy to make for children and kids.