Introduction: Wooden World Map Zebra
We make the world map of different breeds of a tree. The size of our world map will be 1174 mm * 740 mm.
It will be executed from 9 breeds of a tree. Beech, larch, ash-tree, oak, nut, padauk, wenge, iroko and sapel. Wood thickness the 16mm-25mm.
I wanted to make the world map of horizontal strips. Strips on acrylic glass 5 mm thick will be fixed by ordinary self-tapping screws.
Step 1: Drawing.
We draw in a size the world map in the Corel Draw program.
Step 2: Choooose Treeee.
Now we choose the necessary breed of a tree, we pack on it strips and we cut out preparations.
We cut out on the CNC machine.
We cover each strip with wax for a tree.
Step 3: Acryl 5mm
We cut out a basis for the world map from acrylic glass of 5 mm. We mill openings for self-tapping screws. We do them conical that the self-tapping screw didn't stick out outside.
Step 4: Assembly
Now it is necessary to fasten each stripe to an acrylic basis. We print the sketch and we collect consistently.
Step 5: Installation of a Product
We remove a protective film from a reverse side of acrylic glass.
We drill openings in a wall and we twist self-tapping screws. We mount on a wall.
Step 6: Finish.
We look and admire.
Step 7: That`s All
1 Person Made This Project!
- maxikot made it!