Banger, Boltbomb

a cool dangerous loud powerfull banger that can be really dangerous but is well worth it.

Step 1: The Parts

seeing as you clicked on this instructable you want to make it but it can be dangerous so take care wear gloves and eye protection and i wont be held responsible for any accednts apart from that enjoy!

part1/2bolts same type
part2/nut that fits the bolts
part3/swanvesta matches
part4/some paper
part5/elastic band
part5/a stanly knife
part6/somthing to scrape the matchheads onto

Step 2: Making the Base

put one of the bolts on the nut about one thread

Step 3: Making the Explosive

start by scraping the match heads off the matches try to get it so its like a fine poweder keep doing this till you think you have enough to fill the nut i used a bout 21 matchheads (dot push too hard or fast or youll ignight all your powder and have to start againg)

Step 4: The Dangerous Bit

fill up the nut with the match powder and care fully and slowly tighten the outher bolt onto the outher side of the nut tighten it slowly and try to get it as tight as it will go

Step 5: The Last Step

all you need to do is put a stabiliser on now roll the paper over the bolt nd hold it in place with the elastic band then go out side throw it up as high as you can and watch make sure there are no cars or windows near by nd hide behind somthing any way enjoy.