Introduction: Computer Drive Bay Mod

i used the 5.25 inch drive bay to house 4 hard drives expanding the capacty of my computer to 1200 gigabytes.

Step 1: I Knocked Off the Bottom Drive Chassis With a Cold Chisel

Step 2: Marked the Top of the Drive Bay Where I Will Drill the Mounting Holes

the i built a jig to fit the drive bay over for drilling on the drill press

Step 3: Drilled the Mounting Holes.

i used a drill press to more accuratly drill the holes

Step 4: You Should Have a Bay That Looks Like This.

Step 5: Mounted Drives in Bay

Step 6: Mounted Bay in Computer