How to Build a Knex Walker

by deathandestructi0n

2.3K510

Intro: How to Build a Knex Walker

here is what your going to make.

STEP 1: The Legs

make six of these

STEP 2: The Frame Part 1

make this

STEP 3: The Frame Part 2

now make this

STEP 4: Put the Frame Together

STEP 5: Now Add the Motor

STEP 6: Now Add Gears

put one grey spacer and two blue spacers on each side

STEP 7: The Other Axles

do the same on all three axles

STEP 8: The Leg Axles

now make six of these

STEP 9: The Left Side

now add these spacers

STEP 10: The Right Side

now add what you see  to the right side

STEP 11: The Leg Axles Part 2

take step 1 and step 8 and make six of these

STEP 12: Ading the Legs to the Right Side

add 1 leg to each axle and make shure that each one is clamped oposet of each other like in the pic 

STEP 13: Adding Legs to the Left Side

do the same as in step 12 just clip them on the oposet of the right side

STEP 14: More Gears

do this on each yellow conector

STEP 15: Frame Part 3

make 2 of these

STEP 16: Frame Part 4

atach what you made in step 15 to the frame

STEP 17: Frame Part 5.and Finished!

add this to the front and your done!

8 Comments

bobby3dse_Playz_Roblox 3 years ago

If you don't have the red gears used for this project but you do have parts from a k'nex roller coaster project with chain and gears for the chain (see picture), you can use those and put them as shown in replacement.

~KGB~ 13 years ago

looks great!

~KGB~ 13 years ago

no prob