Introduction: 3 Bight, 7 Lead Turks Head Lanyard/fob/luggage ID
The 3B, 7L TH is perfect to combine with other knots to make an attractive multi-use knot
Step 1:
First make the TH. Bring Working End (WE) from left to right around mandrel two times
Step 2:
Bring WE from right to left under, over . . .
Step 3:
and to front of mandrel.
Step 4:
Bring WE under, over . . .
Step 5:
. . .and to front of mandrel.
Step 6:
Bring WE over, under, under. over . . .
Step 7:
. . .and to front.
Step 8:
Bring WE over, under, under, over . . .
Step 9:
and last pass to complete the weave - under, over, under, over, under, over.
Step 10:
Tighten the knot. Take hemostat and pull a separate length of cord through the knot to give a loop at the top of the knot and four strands to tie together to finish the knot
Step 11:
I am giving here a synopsis of my instructable. . .That is why you see a contrasting color. Go to
. . .
.https://www.instructables.com/id/Crown-and-Wall-Kn...
. . .for a step by step description
First tie a counter clockwise crown knot. Each strand goes over the strand to its left..
Step 12:
Then tie as counterclockwise wall knot. Each strand goes under the strand to its left.
Step 13:
The wall knot strands will end up adjacent to a crown knot strand. Take any wall knot strand and bring it across the knot as shown, going under one crown knot strand.
Step 14:
Repeat with the other strands.
Step 15:
Put a hemostat through the center of the knot and pull the appropriate strand through the center of the knot as shown. Repeat with the other strands
Step 16:
I have written two other instructables that would also go well with this TH knot.You might want to try them
