I have adapted the code of a 6 LED Battery Display for the new colored version with tm1651 10 LED-Battery-Display to operate it.
The code for the new 10 LED display is not yet public. I could not find anything.
I have therefore made the effort to adapt the library and the examples
Please note: The chip and the circuit is only designed for 7 LEDs.
Grid 2,3,4 from the TM1651 are not used.
These are required for 4x 7 segment displays.
Two red and 2x2 green are controlled at the same time.
Expiration from Display:
2x red, 1x yellow, 1x yellow, 1x yellow, 2x green, 2x green, 1x blue
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Order Stuff
Step 2: Install Arduino IDE
Start Arduino IDE 1.6.5, go to rider Sketch,
then go to Include-library then Add.Zip-library, then select my modified ZIP-File and install in IDE. Now you can start the example using raider File...Example... BatteryDisplay.
The original example and library was
Published by: Fred.Chu USA
Excuse my layout and my english, this is my first try. ;-)
Enjoy your time
Greetings from Germany