DIY Fan Powered Boat

4,553

24

3

In this tutorial i will be showing you how to make a simple electric boat that uses a cpu fan in order to move. the video features a Time Lapse of building the boat. in real time, it took me about 15 minutes. the boat is super fan for small kids and safe to use. please contact me for any question you might have.

Step 1: Making the Body

Take a milk cartoon and cut it in half.

then, make a cabin out of the other half as shown is the video.

attach the cabin to the main body using a staple\ hot glue.

Step 2: Electronics

The circuit of this project is very simple. solder a 9V battery adapter to the CPU fan. Notice that your Cpu fan might have an additional yellow wire. If you do have one like this, simply ignore. A switch is optional.

Step 3: Attaching the Cpu Fan- PAY ATTENTION TO AIR FLOW DIRECTION !

The last step is to attach the Cpu fan to the back of the boat using some hot glue. It is important to pay attention to the air flow direction of the fan: you want the fan to push the boat forward, not to pull it backwards.

Step 4: Your'e Done !

all you have to do know is to fill up the bath and you are good to go !
if you like this project, you may like some of my others. please check them in my channel:

Roy Pe'er

Share

    Recommendations

    • Sweet Treats Challenge

      Sweet Treats Challenge
    • Build a Tool Contest

      Build a Tool Contest
    • Faux-Real Contest

      Faux-Real Contest

    3 Discussions

    0
    None
    RoyPeerwilgubeast

    Reply 4 years ago on Introduction

    Thanks ! This is my first mini-instructable, and it's good to know that you like it.

    0
    None
    ArcieP1RoyPeer

    Reply 2 years ago

    Mr. RoyPeer can you please help me make my project? . . .