Make one good key ring from old part of computer.
materials: go to second photo
Now drill a small hole on the processor to enter the link.
Spend the link inside hole and is ok.
(remove pins with a burner)
Sorry but my English is not well :((
DIY Old Cpu Key Ring
1,612
3
4
4 Discussions
7 years ago on Introduction
Nice job, I think I might give making one of these a go, a very personalized item, only something a computer geek like me would have, Thanks for sharing Modfi :)
6 years ago on Introduction
i did with core i 7
7 years ago on Introduction
How did you remove the CPU pins? That's the biggest part of the instructable surely? Also, maybe put it in the text of the Instructable in case not everyone hovers over the CPU in the second pic. Wouldn't want to be responsible for people walking around with 370 small holes in their upper thigh! Oof!
Reply 7 years ago on Introduction
Sorry, but this is the first instructable and I know that's not good. Remove the pins with a burner .Keep a pair of pliers the cpu and heat the pins to remove from the top.Simple