HOW TO MAKE FIDGET SPINNER

4,992

32

4

Introduction: HOW TO MAKE FIDGET SPINNER

About: Welcome to the Delta Hack Channel! Here you will find interesting and awesome life hacks and tricks! Subscribe! ;)

Hi again my dear friends!

I have a channel on Youtube - Delta Hack.

Here you will find interesting and awesome life hacks and tricks! Subscribe! ;)

Today we show you how to make at home Batman LED Fidget Spinner

First of all look the video instruction ->

For making that magic ball you need:

  • Plywood
  • Hot Glue
  • 6 Leds
  • Wires
  • Two switches
  • Pen
  • 2x Round Batteries 3V
  • Insulating tape
  • Mini saw
  • Gas-jet

Let's Go!!!

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Сut the Shape

Print the figure from this document.

Circle the figure on the plywood.

Сut out two shape.

Step 2: Cut the Hole

Circle the bearing circle

Drill a hole and cut a circle

Step 3: Make Space for Batteries

It is necessary to clean the place for batteries

Step 4: Installing Led

Need to make 6 holes for LED

Next we connect the batteries and switches

In the last image you can see everything together

Step 5: Insert the Bearing

We insert the bearing and glue the circuit with hot glue

Step 6: Decorate Led Spinner

You need to light a gas burner and light a little Batman Led Spinner

Step 7: Have Fun!!!

Turn on both the switches and play with Batman Led Spinner all day!

It can be taken to parties, to a club, school, university. In case you need to shine in a dark place - the spinner will always be with you.

Play with the children and animals!

I hope you liked it !!! Put your likes and comment on YouTube. We will do more instructions.

Out other projects:

Be the First to Share

    Recommendations

    • Toys and Games Challenge

      Toys and Games Challenge
    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge

    4 Discussions

    0
    gm280
    gm280

    2 years ago

    You know I see these fidget spinners are now everywhere. And I haven't seen one warning about them yet. And this is not picking on you or your design either. But way back years ago I was cleaning a ball bearing and using compressed air to blow it out the bearing after cleaining it by spinning it in my fingers like we see with these fidget spinners. And an SAE certified mechanic told me to never spin any bearing between my fingers like that because it the bearing locked up for any reason, it would tear into your fingers. Not a good idea. But I see these daily and nobody has yet mentioned that.

    Nice project you designed and made anyways. Thumbs Up!

    0
    VampieC
    VampieC

    Reply 2 years ago

    You could have a valid point.

    Thats why sometimes they put a bolt and nut trough the bearing. :)

    0
    Phantomjerret
    Phantomjerret

    Reply 2 years ago

    nobody has died yet...lol

    0
    Delta Hack
    Delta Hack

    Reply 2 years ago

    Thanks for the warning!