How to Make a Stopwatch Using Arduino

6,805

7

2

Introduction: How to Make a Stopwatch Using Arduino

About: Teaching is a very noble profession that shapes the character, caliber, and future of an individual. If the people remember me as a good teacher, that will be the biggest honour for me ...

This Is A Very Simple Arduino 16*2 Lcd Display Stopwatch ...........


If You Like This Instructable Please Subscribe To My Channel

https://www.youtube.com/ZenoModiff


Step 1: Parts .......

* ARDUINO NANO

* I2C LCD MODULE

* PUSH BUTTON SWITCH

* BREADBOARD

* MALE - MALE JUMPERS

* MALE - FEMALE JUMPERS

Step 2: Wiring ......

Connect The Arduino Nano & Push Buttons To The Breadboard

Step 3:

Connect The Wires To The Push Buttons ......

According To Schematics .........

Check Below For Shematics ..........

Step 4:

Connect The I2C Module To The Lcd Display .........

Step 5:

Connect Male - Female Jumpers To I2C Module .....

Step 6:

Connect The I2C Module To The Arduino

GND - ARDUINO GND

VCC - ARDUINO 5V

SDA - ARDUINO A4

SCL - ARDUINO A5

For More Info Check This Instructable :-- https://goo.gl/U4KJPg

Step 7: Schematics .........

Step 8: More Info .....

Arduino Contest 2017

Participated in the
Arduino Contest 2017

Be the First to Share

    Recommendations

    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Super-Size Speed Challenge

      Super-Size Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    2 Discussions

    0
    montecalvol26
    montecalvol26

    Question 3 months ago on Step 1

    Does it have to be a Nano or can it be an Uno?

    0
    Rucksikaa_R
    Rucksikaa_R

    Answer 2 months ago

    It can be either a Nano or an Uno