How to Tie a Threaded Figure Eight With Stopper Knot

Introduction: How to Tie a Threaded Figure Eight With Stopper Knot

About: The ultimate knot tying tutorial channel. Anything from basic stopper knots, to more complicated loops.

Welcome to my How to Knot tutorial, I will be showing you how to tie a threaded figure eight with a stopper knot. This knot’s intended use is for climbing. The stopper knot is added as a safety and must be done when used for climbing. Once learned, this is a fairly easy knot to tie and is essential for climbers. Its design is easily distinguished so it can be easily checked during a safety inspection, it can be directly tied to hardware devices, will self tighten under a load, and can absorb some shock. After a load, this knot can be difficult to untie.

Be sure to check out the descriptive video at the end to help for further understand.

Step 1:

First start by creating a figure eight knot.

Now feed the working end back through the knot.

Follow the same figure eight path while still keeping the loop.

Dress accordingly.

In order to add a stopper, you will need a longer working end.

Wrap the working end around twice on the standing part.

Then insert the working end through the loops.

And tighten.

Step 2: Watch Video

I hope you enjoyed my tutorial, please leave a comment below and give my video a thumbs up. If you would like to see more knot tying tutorial, feel free to follow my profile and subscribe to my YouTube channel.

Be the First to Share


    • Lighting Challenge

      Lighting Challenge
    • Metalworking Contest

      Metalworking Contest
    • Puzzles Speed Challenge

      Puzzles Speed Challenge