Step 1: Equipments Required !!!!

So these are the required equipment for our project and specifications are as follows:

1.Bread Board - 01

2.Bolt IoT - 01

3.Usb Cable -01

4.Light Dependent Resistors - 04

5.Resistors ( 1 Kohm ) - 04

6.Jumper Wires - 06

7.One Router

8.One Laptop

Step 2: Circuit Diagram !!!

The above photos clearly explains the circuit diagram of our project............ and it is easy to adjust all of those in a bread board .....................

Step 3: Procedure to Make This ..........(01)

First of all , get the router connected to Bolt IoT platform ( kindly visit www.boltiot.com for more details ) and connect the smartphone and laptop to that Router itself ,....Now create a file or text page and start writing the code (my code will be available in next step ) then save as .htm extension ( but not .html ) ............and name it as index.htm . Now, u are ready to upload the code in the bolt ......To do this kindly visit the above-mentioned site for it ............and also download Lan Scanner for finding the IP address of the bolt .................