Make Your Own 1D Pong Game

9,646

27

3

Introduction: Make Your Own 1D Pong Game

About: Awesome Electronics Tutorials, Projects and How To´s

For this project I will show you how I combined an MDF board with buzzer buttons, LEDs and an Arduino Nano in order to create a 1D Pong Game that is really fun to play. Along the way I will show you how to create the electronics circuit and how difficult it actually is to program such a 1D Pong Game from scratch. Let's get started!

Step 1: Watch the Video!

The video gives you all the general information to create your own 1D Pong Game. During the next steps though I will present you some additional information.

Step 2: Order the Components!

Step 3: Create the Game Board and the Circuit

Here you can find the plans and the schematic for the 1D Pong Game. Feel free to use them for your own game.

Step 4: Upload the Code!

Here you can download the code for the 1D Pong Game. But before uploading it to the Arduino you should also download/include the FastLED library (https://github.com/FastLED/FastLED).

Step 5: Success!

You did it! You just created your own 1D Pong Game!

Feel free to check out my YouTube channel for more awesome projects: http://www.youtube.com/user/greatscottlab

You can also follow me on Facebook, Twitter and Google+ for news about upcoming projects and behind the scenes information:

https://twitter.com/GreatScottLab

https://www.facebook.com/greatscottlab

4 People Made This Project!

Recommendations

  • Mason Jar Speed Challenge

    Mason Jar Speed Challenge
  • Bikes Challenge

    Bikes Challenge
  • Remix Contest

    Remix Contest

3 Discussions

0
JohnH972
JohnH972

Question 2 years ago on Step 4

I tried downloading the code for this game, but when I try to open it, it says arduino can't create the sketch. can anyone help me?

0
JohnH972
JohnH972

Answer 2 years ago

found the problem, it was just an outdated version of arduino ide

0
JohnH972
JohnH972

2 years ago

Hi, the issue you're describing sounds partly a coding issue (with the discolored lights) and partly a solder joint issue on the light strips. Also, I am having problems. when I download the code and open arduino,it says it can't create the sketch. would you happen to have the code that I could just copy and paste?

Addendum:

I got the code working. I have had no issues with mine as far as discoloration. it may be your hardware. I am also using 22 gauge wire and haven't had any issues