Hey Guys this is my first instructable build, but if u have any questions comment below n ill try to answer as best i can

Step 1: Items Needed:

Materials:
1 Craft Clock Mechanism or Old wall clock (i took mine from my mom)
17 Old CDs (i used some that was scratched) Used in layers of 5, then 4, then 8
Craft sticks (not shown)

Tools:
Hot Glue Gun and glue sticks
Scissors
Screwdriver

Step 2: Assemble Layer 1

Place a CD that will act as the middle of your clock around four other CDs. Add some popsicle sticks to hold the CDsin place

Step 3: Assemble Layer 2

Glue a CD on each of the corners between two sticks

Step 4: Assemble Layer 3

now glue two CDs (2 per side) on each of the four corners like so

Step 5: Attach the Clock Mechanism to Layer 3

Assemble your clock mechanism into your clock. While all clock kits go together essentially the same way, see your packaging for specific instructions.

Step 6: Finished

Congratulations! You now have a working CD clock that you can show off or that can add a special touch to your room

Thanks for checking out this instrucatable!