Introduction: Minion Batman V Superman Piñata
It's my nephews Superheroes-themed Birthday and I decided to make a Batman vs Superman Piñata.
Step 1:
Start by making ballon paper mache, cutting it into halves and elongate the halves. I used a space heater and hair dryer to speed they drying process.
Step 2:
I used an Oatmeal container to make the Minion goggles. This one had a plastic ring that I was able to pull off and place Saran wrap on top and replace the ring.
Step 3:
I decided to make the two-eyed Minion as Batman and the other as Superman. I made Batman's ears with paper cones and later (not in these pictures) cut them down to side.
Step 4:
I used the core of paper towels to make the arms and butcher paper to make the hands.
Step 5:
I also make Batman's Utility belt from pieces of cardboard.
Step 6:
I wrapped Crape Paper around a cardboard and cut slits every 1/2-1 inch. The last parts are just to apply form the bottom to the top.
Step 7:
Participated in the
Make it Move Contest 2016