Motorized Bicycle 2




Here is another bicycle i build in my garage
Thank you for your time.



    • Weaving Challenge

      Weaving Challenge
    • Pocket Sized Contest

      Pocket Sized Contest
    • Tape Contest

      Tape Contest

    12 Discussions


    4 years ago

    That is amazin, I have a 22 mile commute to work and have been parking half way so I can ride my bike. Now i am inspired to build my own motor bike so I can bike the whole way. Truly a work of art!!


    6 years ago on Introduction

    Hey B,
    Gotta say I enjoy your work, bikes as well as the other pieces.

    Just wondering if you'd ever be willing to 'Ible one of your bikes. Would love to know the specifics on your engines and components. Been thinking of building a bike because we just spend way too much on gas each month.



    7 years ago on Introduction

    This is one of the coolest bikes I have ever seen. I'm building a motorized bike and this is so close to what I had in mind. I have some questions about your bike.

    What is the round canister looking thing in the center of the bike frame?

    What is the silver bottle below the gas tank?

    Where can I get some saddle bags and tool bag like that or similar ones?

    Are the lights battery powered or generator powered?


    1 reply
    Plan Bzdegaine

    Reply 6 years ago on Introduction

    The canister is a 1 quart empty paint can from the hardwarestore and is the toolbox for the bike .
    The bottle is an expension tank and is for better trottle pickup
    I got these bags on ebay . These came from a 4 wheeler bike
    The lights are from a bristol sailboat and the bulbs are closet lights from home depot and work on 3 aaa batts
    Sorry for the long time to answer your questions


    7 years ago on Introduction

    excuser moi car je vous écrit dans ma langue pour vous féliciter sa cela resemble beaucoup au premier velo moteur produit en europe voir la connaissez vous aussi notre célèbre velo solex en image ici

    Plan Bhelloze

    Reply 8 years ago on Introduction

    I install a hub mounted sprocket adapter on all the bikes i build. It allows for
    perfect alignment of the chain.
    Thank you for your comment

    hackmattrPlan B

    Reply 7 years ago on Introduction

    Where did you get the adapter? Did you make it or buy it? I ordered one of the kits they sell and plan to modify it a bit so the bike looks like a mini motorcycle and I heard that the sprockets are hard to line up and mess with the spokes after awhile.

    BTW. Yours looks cool. Almost like the original harleys from the 1900-1910s

    Plan Bhackmattr

    Reply 7 years ago on Introduction

    I bought this sprocket adapter for the black bike from Piston
    This is the only way to assure perfect chain alignment. They sell for about
    $60.00 + ship. but are well worth it. They are not available for all hubs so i started making my own for some of my bikes i build. But every bike get one !
    Also get yourself a new chain from farm supply store. You will thank me later.
    Thank you for your comment
    Good luck with your build

    very impressed. I actually just finished my instructable over my second electric bicycle. you should really turn these into ibles and enter the epilog laser challenge, they look great! although maybe you could get some more pics of the drive system you are using.

    1 reply

    Thank you. I just added some more photos of the drive and etc.
    I would like to enter but i never won anything in my live.
    I check out your bikes later ( like to build one too )
    Thank you for your time