Welcome to the DIY mood lights concept,
Here we will be discussing DIY mood lights. The uniqueness of this mood lights is that it can be placed anywhere of your interest. This gives awesome feeling to your scenario and sets the feel off. Lets get into how to make this attractive mood lights.
Scroll Down for the steps.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Requirements for This Project:
Step 2: STEP 1:
Take a balloon and blow it to the required size. For this u could prefer hard balloon and not like water balloons because in case of water balloons air will go off soon.
Tie one end of the thread to the balloon.
Spin the thread around the balloon so that you might be knowing how much thread to use.
To make the thread stiff and to get sticked to balloon we need some glue. For this, take some required quantity of glue and add little amount of water to it. Stir the mixture well.
Remove the thread from the balloon and apply glue on the balloon.
Dip the thread in the glue and start spinning tightly around the balloon. At last after spinning give a coat with glue over the thread.
Allow it to dry for 1 day.
After it gets dried burst the balloon and remove the balloon.
Make more balls like this and add lights to it. Decorate your room by hanging this anywhere as your wish.
I leave this to your creation. I have created something as shown in the picture above.
Let me know if you have created like this or something better
If you are interested in this project, Like, Vote and Subscribe to me.