Ornithopter

815

4

7

hi, this is my first instuctable an iam going to show you that how can you make an dragon fly ornithopter. i have already make one and itsd fly preety god but you canot make this in just 1 day...i make mine in 2 days...so lets start.

Step 1: Making of Macanisym

now make its macanisym..get a tin peice and give him a shape like in the give pic and you need 4 peice like this..

Step 2: Macanisym

now give a shape of your macanisym by folding them like this..

Step 3: Fnishing of Macanisym

now take a pin o a peice of wire and three beads and connect your macanisym like the given picture..but dont add glue on it ,then it will not work smothly.. (BUT DONT CONFUSE BECAUSE IN THIS PIC THE MACANISYM IS DIFFERENT BUT YOU NEED TO CONNECT YOUR MACANISYM IN THE SAME WAY).

AND IF YOU WISH THEN YOU CAN ADD PLASTIC TUBE BETWEEN THE CENNET OF MACANISYM FOR SMOTHNESS (you can get plastic tube in the pen).

Step 4: Now Make the Connecting Rods.

now make the connecting rods..you need to make them by verry light material ... in this pic the both connecting rods are diferent to each other you also need to make them in the same way but in this pic there is only 2 rods you need to make 4 rods..

Step 5: Now Its Time to Make Cank..

in this step you ned to make crank...just make a cank and add conecting rods on it like the given picture.

Step 6: Making of Ornithopter's Body

hmm..now this is dificult to understand because i dont have the full instructable.. but if you see it clearly then you can understand easly.. make the ornithopte's body by balsa wood and join it by supe glue.....(IN THIS STEP IAM POSTING SEVERAL PICTURE...SEE THEM AND TRY TO UNDERSTAND....THAT HOW CAN YOU MAKE THE BODY)... SOME OF THE PICTURES ARE NOT THE PART OF THIS INSTRUCTABLE...... BECAUSE THE CONECTING RODS ARE MADE UP OF WOOD AND MACANISYM IS DIFERENT...

Step 7: Making of Wings..

now the body is compelete and now make the wings i dont have any plane for wings but you can make them by your concept like in the picture..make them by balsa wood and lite plastic film.. and the same material for tail.

see the below picture and make the wings.... and as i say some of picture is not are the part of instructable but you can get an idea by seeing them. ..... once you ad the wings then ad rubber band.....now iam going to ad video thats how its fly... if you have any comment or question you can ask me...and in the last (SOOOOO SOORY FOR MY BAD ENGLISH :D)

Step 8: Video of Flying Ornithopter


Step 9: Video of Flying Ornithopter


Step 10: Vedio of Flying Ornithopter


Share

    Recommendations

      • Games Contest

        Games Contest
      • Stone Concrete and Cement Contest

        Stone Concrete and Cement Contest
      • Planter Challenge

        Planter Challenge

      7 Discussions

      0
      None
      lemonie

      9 years ago on Introduction

      Click the Forum link I gave you (above) - add one image / video or both, and post a URL to the original thing. L

      0
      None
      faizeelemonie

      Reply 9 years ago on Introduction

      yes, i already told him that iam going to publish this on instructables..

      0
      None
      lemoniefaizee

      Reply 9 years ago on Introduction

      You should be publishing your own stuff. If you didn't make this it's not appropriate (whether you tell the creator or not). L

      0
      None
      faizeelemonie

      Reply 9 years ago on Introduction

      i just post this because i want to inform people about that,there is only 2 or 3 instructables for ornithopter..othere wise i dont want to get good comment..sory if u get angry for this..

      0
      None
      lemoniefaizee

      Reply 9 years ago on Introduction

      I'm not angry (at all) - you're new. Places to show other people's stuff are Blogspots, e.g. technabob. If you've got something that you found that you'd like to share, post it in a Forum topic. If you've made or done something cool yourself, post it as an Instructable.

      L